T. Stehle, R. Eisseler, K. Drewle, S. Weiland, J. Twiefel

Investigation of process forces of ultrasonically assisted scratch tests

Introduction

Investigation of process forces of ultrasonically assisted scratch tests. Investigate process forces of ultrasonically assisted scratch tests. Understand machining mechanisms for hard/brittle materials to improve productivity using ultrasonic vibrations.

Abstract

Due to their abrasive qualities, machining of hard and brittle materials is predominantly performedusing tools with geometrically indefinite cutting edge. However, these processingmethods offer only low productivity, which often can be increased by superimposing ultrasonicvibrations to the process. At the same time this hybrid process design involves great uncertainties,as influencing factors and the mechanism of action are not sufficiently describedyet. In order to close this knowledge gap, firstly the occurrences on the scale of single abrasivegrains shall be observed. This should increase the overall process understanding andreveal fundamental interrelations of machining with geometrically indefinite cutting edge. Toachieve this, scratch tests with well-defined boundary conditions will be performed, analyzedand compared. As a result of the experiments the interdependencies of process forces, cuttingspeed, ultrasonic amplitude and depth of cut will be presented.

Full Text

Comments

You need to be logged in to post a comment.